Jefferson Lab's Workbench Projects

| List of Projects | Magnets on a Stick | Background | Overview | Component List | Base Construction |
| Dowel Rod Preparation | Magnet Preparation | Assembly | Appendix A | Download PDF |

Component List

ring magnets with a 2 3/4" outer diameter and a 1 1/8" inner diameter (4 needed)

3/4" thick particle board (roughly 1/2 square foot needed)

1 1/8" diameter dowel rod (roughly 1 foot needed)

1 1/4" diameter dowel rod (roughly 2 inches needed)

1/8" thick rubber O-rings with a 1 1/4" outer diameter and a inner diameter of 1" (3 needed)

2" long, coarse thread drywall screws (2 needed)

adhesive feet (8 needed)

magnet polarity labels

wood glue

�All of the components have been gathered. The wood for the bases has been cut and holes for the dowel rods have been drilled.

All of the components have been gathered. The wood for the bases
has been cut and holes for the dowel rods have been drilled.

| List of Projects | Magnets on a Stick | Background | Overview | Component List | Base Construction |
| Dowel Rod Preparation | Magnet Preparation | Assembly | Appendix A | Download PDF |